Diy Farmhouse Table

  • by Noah Williams
  • Jun 15,2020
  • 1 Views

I followed Ana White’s DIY farmhouse table plans to build our new dining room table!

Hi Friends!  Part of my dining room makeover was figuring out if I even wanted to have a dining room table.  We rarely eat in the dining room and most of the time my craft stuff ended up all over it.  In the end, we decided to sell our table and hutch and that I would build a DIY farmhouse table.

Of course, I scoured Pinterest and in the end, I built this beautiful table with Ana White’s free plans inspired by a ZGallerie table.  I absolutely love how this grey farmhouse table came out!  It looks amazing in my new dining room.  To check out my post on my dining room update click here.

Ana White DIY farmhouse table

This bad boy was a labor of love and I have a nasty bruised big toe to prove it!  I’ll pass on some free advice… this is heavy!  Do not be impatient like me and try to move it by yourself.  I tried to flip over the tabletop and it landed on my big toe… ouch!

Ana White Farmhouse Table Plans

Check out Ana White’s free plans here to get .the full tutorial!  She has so many amazing plans on her site, so you’re welcome if you’ve never checked her site out before!  You can find the plans for Ana’s happier homemaker bench that I used for the benches by clicking here.

Building a White Farm House Table

Disclosure: This post contains affiliate links from Amazon. I receive a small commission at no cost to you when you make a purchase using my links (purple text)

If you haven’t used a Kreg Jig before, don’t be scared, it is super easy!  It allows you to make pocket holes quickly and easily.  Then you attach the boards together with pocket hole screws.  You can get one for $40 on Amazon by clicking here.


 

I just use a regular clamp with it.  Since all the wood I was working with was 2 inches thick I didn’t even have to change the setting.  Just clamp it on, drill a hole, loosen, slide down board about 6 inches and drill again.  Repeat, repeat, repeat!  That’s all there is to it!

DIY Farmhouse table

DIY chalk paint table

ryobi drill

ryobi drill

Once you have all the pocket holes you attach the boards together with pocket hole screws found here.  I actually love these screws.  They screw in so easily that I use them for when I’m drilling straight in like on the legs of the table.kreg jig table tutorial

Cutting the Legs of DIY Rustic Table

For the table leg beveled edges, it was a bit tricky.  You need to cut the 2x4s on the side.  Cut one side at 30 degrees then measure 38 inches (or whichever length cut you’re on) and cut the other end at 30 degrees (not parallel ends!)  

After the first cut measure 1 1/4 inch from the long point and draw a line.  Then change your miter saw to 45 degrees and cut the small part off.
kreg jig table tutorial

kreg jig table tutorial

D?IY farmhouse table tutorial

kreg jig table tutorial

kreg jig table tutorial

Then for the other 2 cuts, I laid the first one on the top and traced it.

DIY farmhouse table tutorial

DIY farmhouse table tutorial


I’d love if you come craft with me on Instagram!  Click below to follow.  Also, if you make any of my crafts I’d love to see them!!  Tag me @leapoffaithcrafting or #leapoffaithcrafts.instagram follow


Preparing to Paint a Grey & White Farm house Table

I sanded the top down in my garage with 120 grit and then 220 grit with my orbital sander.  I put the legs together, the top together, and then moved them into my dining room to put them together.

DIY farmhouse table tutorial

D?IY farmhouse table tutorial

Rustoleum weathered grey table

Finishing the White & Grey DIY Farmhouse Table

I really wanted to lighten up my room by having a partial white farm house table.  So, I painted the bottom half of the table with Renaissance Chalk Paint in Ivory Tower.  You can find it here on Amazon.  I lightly sanded with 220 grit in between coats and sealed it with 2 coats of polycrylic  (found by clicking here).


 

For the tabletop, I wanted a more farmhouse table grey look.  So, I started by brushing on a coat Minwax Wood Conditioner (find on Amazon by clicking here).  

After that dried, I applied a coat of Minwax Dark Walnut Stain.  I brushed on a coat with a brush and then wiped off the excess with a cotton shirt.  I then added a coat of weathered grey on top of it, let it sit for 10 minutes, and then wiped off the excess again.

Rustoleum weathered grey farmhouse table

You can see the difference that adding the extra coat of weathered gray makes.  The left half of the table has the gray on it and the right side is only dark walnut stain.

Rustoleum weathered grey table

After everything was dry, I applied 3 coats of a Urethane top coat to seal my DIY farmhouse table.  Whew!  This is now my new dining room and the new grey and white farm house table!  It’s not perfect but it’s handmade and I love it!grey and white farm house table

DIY Farmhouse Table Ana White

I also put trim around the windows which added that extra feel of farmhouse and warmth!  Click here to read the full tutorial on how to make these easy farmhouse window trims!

Save this tutorial for later!  Simply hover over the top left of the image below and PIN It now!
DIY farmhouse table tutorial

On the other side of the room, I made a super easy Shanty 2 Chic bench and mudroom wall for all my kiddos stuff!  Click here to read my tutorial on how to put this mudroom wall together!DIY mud room wall and bench

My dining room is so much lighter and brighter now, I absolutely love how it came out!  It’s amazing what a difference paint and furniture makes!

Thanks for stopping by!!  Let me know if you have any questions! 

Have a creative day!

leap of faith crafting

Related Articles